PDA

View Full Version : alloFactor - a free practice management software solution for medical practice


Joe@alloFactor
01-14-2008, 09:06 AM
Have you taken a look at alloFactor?

alloFactor (http://www.alloFactor.com) is a free practice management software solution for medical practices. It is the only software a clinic would ever need as it supports all internal clinic functions including scheduling, registration, billing, EMR, reporting and all external interactions with payers including claim submission, ERA and eligibility verification. The software is built to allow communication with external agencies such as billing, transcription, appointment scheduling vendors. Since it has extensive functionality, website has free tutorials and free customer service to help customers become proficient with the system.

With an integrated database and automated workflow, alloFactor increases productivity, velocity and accuracy within the clinic. It is deployed as hosted solution eliminating the need to purchase expensive hardware or backup solutions. All communication is encrypted to protect patient information. alloFactor is unique in that it does not use a web browser; instead it has the familiar, intuitive Windows based interface. alloFactor automatically self-updates with the latest version, which are generally released every 2 weeks. Since it is not browser based, alloFactor can directly interface with compatible desktop products such as scanners and mobile charge capture software.

alloFactor’s business model is truly unique – it does not charge for its software modules (except optional EMR module - $35/month), customer service and setup. However it supports itself by charging a small fee for each payer transaction, typically less than what you would pay your clearinghouse to submit claims electronically.

For more details go to alloFactor (http://www.alloFactor.com)

bcde273
11-12-2008, 10:41 PM
  兆欧表 (http://www.sh51817.cn/class.asp?lx=small&anid=73&nid=628)俗称摇表,是电工常用的一种测量仪表。兆欧表主要用来检查电气设备、家用电器或电气线路对 地及相间的绝缘电阻,以保证这些设备、电器和线路工作在正常状态,避免发生触电伤亡及设备损坏等事故。兆欧 表大多采用手摇发电机供电,故又称摇表。它的刻度是以兆欧(MΩ)为单位的。   1.结构  两个线圈固定在同一轴上且相互垂直。一个线圈与电阻R串联,另一个线圈与被测电阻Rx串联 ,两者并联接于直流电源。  见附图。  2.工作原理  在测量时,通过线圈的电流I1=U/(R1+R),I2=U/(R2+Rx),其中R1、R2为线圈电阻,线圈受到磁场的作用,产生两个方向相反的转矩,T1 = k1*I1*f1(α),T2 = k2*I2*f2(α)。 f1(α)和f2(α)分别为两个线圈所在处的磁感应强度与偏转角α之间的函数关系。  仪表的可动部分在 转矩的作用下发生偏转,直到两个线圈产生的转矩平衡。  当两个线圈产生的转矩平衡时,有 T1 = T2   即 k1*I1*f1(α) = k2*I2*f2(α)   上式表明,偏转角α 与两线圈中电流之比有关,故称为流比计。   结论:1.偏转角α与被测电阻Rx有一定的函数关系,所以α角可以反映出被测电阻的大小。  2.仪表 的偏转角α与电源电压U无关,所以手摇发电机转动的快慢不影响读数。